10.0.0.0.1:- Do you know what an IP address is? If not, you’re in for a treat. An IP address is a numerical label assigned to each device connected to a computer network that uses the Internet Protocol for communication.
In layman’s terms, it’s your device’s unique identifier on the internet. Just like your home address allows people to find your house, your IP address will enable devices to find and communicate with your device.
Most people have a dynamic IP address, which can change from time to time. However, you can also have a static IP address set by your ISP that never changes.
Now that you know what an IP address is, you’re probably wondering what the “10.0.0.0.1” IP address is.
In this article, we’ll discuss what the “10.0.0.0.1” IP address is and what it means for you.
What Is 10.0.0.0.1?
You will wonder to know that this IP is not assigned to any device, but still, you can type this in the URL bar of the web browser, and it will show up as an error page.
The actual IP address which is mostly used to login into the router admin panel is 10.0.0.1, which is often mistyped as “10.0.0.0.1”.
Manufacturers use this IP address as a default IP address to log into the router’s admin panel.
You can use this IP address to configure your router settings, such as WiFi password, name (SSID), and other parameters.
How Can You log in To Router Using This IP?
If you want to login into the router using this IP address, then follow these simple steps:
- First, connect your device to the WiFi network of your router.
- Then, open any web browser, type “10.0.0.1” in the URL bar, and hit enter.
- You will be redirected to the login page of your router.
- Enter the username and password for your router. The default username and passwords are “admin” and “password.”
- After entering the correct credentials, you will be logged in to your router’s admin panel.
Remember not to type “10.0.0.0.1” instead of “10.0.0.1”.
What Are The Benefits Of Using This IP Address?
There are many benefits of using the IP address:
- You can change your router’s settings, such as the WiFi password and name (SSID).
- You can troubleshoot various problems with your router.
- You can check who is using your WiFi connection and block them if necessary.
- You can see how much data you have used and how much is left.
What To Do When Unable to access 10.0.0.1?
There are various reasons you might not be able to access the IP address.
Some of the most common reasons are:
- Check for any typing errors, and make sure you are entering the correct IP address. Remember that, the IP address is “10.0.0.1” and not “10.0.0.0.1”. Ensure you are not typing “O” instead of “0”. There should be no space between the characters. IP addresses are only numbers.
- Try restarting your router if you have typed the correct IP address and cannot access it. Unplug the power cord from the router, wait for a few seconds, and then plug it back in. If that doesn’t work, check if your computer or device is connected to the correct WiFi network.
- Contact your ISP and ask them if they are blocking the IP address.
- Try to connect after removing the cache and cookies from your web browser. If nothing works, you might have a problem with your router, and you should contact the manufacturer for assistance.
You may try some other troubleshooting steps, like resetting the router to factory settings or updating your router’s firmware.
How To Factory Reset Your Router?
You should factory reset your router only as a last resort. This will delete all your custom settings and restore the router to its default settings.
To factory reset your router, follow these steps:
- First, find the reset button on your router. It is usually located on the back of the router.
- Then, use a paperclip or something similar to press and hold the reset button for about 10 seconds.
- After that, release the reset button and wait for your router to reboot.
- Once the router has rebooted, you can access it using the default IP address “10.0.0.1” and the default username and password.
How To Differentiate Between “10.0.0.1” and “10.0.0.0.1”?
The easiest way to differentiate between “10.0.0.1” and “10.0.0.0.1” is by looking at the number of dots in each IP address. As you can see, “10.0.0.0.1” has four dots while “10.0.0.1” has only three dots.
Another way to tell them apart is by trying to access each IP address in your web browser. “10.0.0.0.1” will return an error, while “10.0.0.1” will take you to the login page of your router.
Finally, remember that “10.0.0.0.1” is not a valid IP address, and you should never try to access it.
Conclusion
It is about the default IP address, “10.0.0.1,” also known as the host address. This is the address that is used to access the admin panel of your router, not 10.0.0.0.1. You can use this IP address to change your router’s settings, troubleshoot various problems, and even check who is using your WiFi connection.