is a private IP address that is often used as the default gateway for many home routers and modems. It is used to access the administrative interface of the router or modem, where you can configure various settings such as network settings, wireless settings, security settings, and more.

How do I log into my 192.168 1.1 IP address?

If you are worried about How do I login as admin on WiFi? router, then you have to follow on some steps;

  • First of all, open a web browser and go to or simply fetch this ( ) IP address on your browser Input bar.
  • Then wait a little time.
  • Next, a Pop-up Box appears also asking you to Enter your Router Username and Password.,
  • Then, simply Enter Login details then will be redirected to the router dashboard.
  • Yes, it’s done! Now, you’ll get all the access to your admin panel.

If you’re not getting to access your router’s admin panel by using this IP address, then you can go for or IP address.

Forgot Username and Password?

Here, we will provide you with a complete discussion on this;

If you’ve not changed the default Password and Username

  • You may get the default username and password from the manufacturer,
  • Well, if you have not changed it then you’ll surely get it on the upper surface or back surface of your router sticker.
  • If you check the sticker properly, then you’ll surely get to watch all the details over there
  • Yes, you’ll find all this information inside of the system too.

If you have already changed the username and password then you have to follow the below steps.

How do I factory reset my router?

if you have forget your wifi password? Now may one question occur in your mind, How do I change my home WiFi password? just follow some easy steps to create new one password.

  • Now, find out the reset button of the router,
  • You need to do the factory setting over there to do so; you can simply press and hold the regulator inside the hole for a minimum of 10 seconds.
  • In this case, you can simply use a pen or other sharp things.
  • Now, once the router is restarted, you need to fetch the IP
  • Then, you can simply follow up with the default username and password.
  • Now, you need to set up the connection between the system and router or modem.
  • Well, keep your ISP provided setting easy to get connected to the internet.

How do Find out the Router IP address?

Well, if you want to discover your IP by using your computer, then you have to follow some steps. It’s quite different for all operating systems. Here we’ll point out almost all operating systems that you can use to discover Router IP address.

Windows Operating System

  • Start > All Programs > Accessories > Command Prompt
  • Now, you’ll get to watch the command fetching window,
  • There you have to place “ipconfig | findstr/i “Gateway” command,
  • Now, you’ll get to watch something like this; C:\Documents and Settings\administrator> ipconfig | findstr/i “Gateway” Default Gateway . . . . . . . . . : 192.168.l.l
  • Yes, it’s all set!

Linux Operating System

  • First of all, open the Termina and follow up this route;
  • Applications > System Tools > Terminal
  • Now, after opening the terminal, you have to place some command;
  • ip course | grep default
  • Then, you’ll get to watch this;
  • temo$ ip course | grep default default by means of 192.168.l.l dev eth0 proto static
  • Yes, it’s done!

Mac Operating System (iOS)

  • Once again, go to the terminal and follow this route,
  • Finder > Applications > Utilities > Terminal.app
  • Now, place this command netstat – nr | grep default on the terminal
  • It’ll show this result tmeo$ netstat – nr | grep default UGSc 50 46 en1
  • Yes, it’s all set!

How to Change Router IP Address?

If you want to make your system secure, then you can simply change your router’s IP address frequently. Yes, it’s an easy process, but to do so, you have to follow up several steps. Well, it’s different in all router companies. Here, we will provide you with a quality idea on this by naming some of the popular router companies;
  • At first, log-in to your default admin panel at
  • Now, follow this; Advanced settings > Network > LAN
  • Now, at the IP address blank, you can simply place your desired IP address.
  • Yes, it’s done, and save it. After that, the router will reboot to apply that change.

Net Gear:

  • First of all, you need to login to the router setting page by using or you can simply use the http://www.routerlogin.com address as well.
  • You’ll get to watch the default username and password.
  • Now, follow up this instruction Advanced > from left side menu go to “”Setup””> LAN Setup.
  • Now, under LAN TCP/IP Setup, you’ll get to watch the customization option that you can do according to your will.
  • Yes, you can apply the change and reboot the system to update the setting.
Net Gear
  • Like the previous login to the router setting page by using that particular username and password,
  • Now, Go to Setup> Network Settings,
  • Well, now you’ll get to find the Router IP Address field,
  • Change it according to your will and save it.

If you do not get the access by using IP;

Then How to access 192.168.l.l?

If you’re not getting access, what would be the alternative ways?

  • You can get the username and password on a small sticker on the bottom of the device. So, a new router comes with all the data that you can simply use those details to get connected. There you’ll get to watch the default IP addresses, 192.168.l.l,, or
  • But, in the older one, you’ve to follow up several steps to get access to the router without using this method.
  • Well, there are three steps that you can follow to login to the admin panel of your router. Here, we will mainly focus on those points.

Alternative Method to login Admin Panel (192.168.l.l)

Here we have discussed top methods by using these steps you can easily login on your router dashboard.

Use cable instead of WLAN

If you no longer login to your via WLAN using an IP address, then it would be better to connect your router and system by using an Ethernet cable. Here, a laptop would play a significant role for you because the length of that cable won’t be more. So, you can simply use that short cable to set up the connection. And this method would be the best alternative to WLAN.

Enter IP address correctly in your browser

If you’re not getting any response by using the IP address, then you can simply search in the address line then confirm it. No! Make sure, Not to go with https:// over here. If you do so, then you’ll get error messages. You have to just put on your browser.

Now, you need to follow these steps;

  • Click on Change Adopter Setting,
  • Right-click on the following connection of the router,
  • Now, select “Properties” from the context menu.
  • Now, find the entry “Internet Protocol Version 4.”
  • It’s time to select the properties,
  • Make sure “Obtain IP address automatically.” 
  • Now, the same applies to the DNS Server Address.

What is my WiFi password? How to Findout IP address of the router?

Well, it’s easy to way to find out the(192.168.l.l) IP address of the router. If you find that, it’ll be easy to set up a stable connection to your system.

  • First of all, press the Windows key and R simultaneously,
  • Type cmd in the line and confirm it,
  • Now, you need to type “ipconfig” into it and confirm it as well,
  • Then, Windows will list all installed network adapters.
  • It includes the current IP address of the router, and it’s the way of getting the method of entry directly to the admin panel of the router.

Why is 192.168 1.1 not opening?

192.168 1.1 not working

Okay! If you’re not getting the router access when you typing this IP address on the browser Then maybe this problem occurs due to a lot of reasons; as a reason, we can say

  • Check Firewall is Blocking Access or not?: It may happen that the firewall may be blocking your access. Now, it’s your turn to check the presence of any firewall over there. If it is there, then it’s essential to allow the IP access, or you can temporarily disable the firewall in your system. After completing all of your operating, you can set the reactivation of your firewall. Yes, the Windows firewall should not be responsible for this. With this, it’s essential to check out the default setting section of your system.
  • Parental Control: Yes, another reason for not getting access to as a reason we can say “parental control software”. It actually denies access to the router’s interface website. So, you can simply temporarily disable that software.
  • Security of Browser or Browser Blocks you: We have discussed many reasons above and browser issue this can the main reason so must checkout your browser . You have to confirm that is your current browser creating a problem or not. The third possibility of not getting access to the router would be this. Yes, the browser may block this permission from you. So, you can simply try all those previous methods by using another browser like Firefox, Bing, or others.
  • Network card or an IP address: Yes, you need a network card or an IP address to access the internet in your system. If you’re not getting access to your router, then you can simply use this router IP to gain access by using only a few steps. With this, you can simply set up the connection and get the overall access to your router for setting it up or fixing the errors as well.

How to repair standard routers without Technical Knowledge?

Actually, it’s different in all router companies. Here, we will take the example of the Linksys router manufacturing company. If you want to repair standard routers and modem problems, you need to follow up on some steps. These are as follows;

  • Firstly, Restart the router and keep it ON.
  • See, the surrounding features, if you get to connect by using those features.
  • Check out the indicator on the router that represents the internet connection.
  • Check the indicator is blinking or not?
  • Then, check if your modem is connected or not?
  • Now, check if you can access the router configuration setting panel by typing on the search bar.


How do I change my 192.168 1.1 passwords?

Here, we have provided you with a decent guide on this, so please go through the changing password segment properly.

Is this IP 192.168 1.1 Method Helpful to Get the Access to your Router?

Yes, it’s definitely helpful to get access to your router.

How to get access without doing Much Work?

Yes, you’ll definitely get the access if you follow up on these steps that we have provided you with over here


Here, we have provided you with the best guide on the IP direct log-in method to the router’s admin panel. If you follow these steps, then you’ll surely get access without hard work. So, I hope you like this overall discussion on this IP. If you like, then please share this fantastic information with your friends. Stay tuned for the next update, and thanks for reading.